2 | Safety
2.4
Personal Protective Equipment and Personnel Qualification
When working on and with the collet chuck CAPTIS-M, personal protective
equipment must be worn. The owner is responsible for providing personal
protective equipment.
▪ Personal protective equipment must be in perfect condition when carry-
ing out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the
working area.
▪ During rotational operation of the collet chuck CAPTIS-M, no protect-
ive gloves are to be worn! Hand protection is only to be worn during
transport, assembly and maintenance and as long as the collet chuck
CAPTIS-M is at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Work on and with the collet chuck may only be carried out by qualified oper-
ating and specialist personnel (see Qualification of Operating and Spe-
cialist Personnel [} 59]).
2.5
General Dangers
When using the device there is a special potential of residual risks
▪ during assembly and set-up work,
▪ during operation and
▪ during maintenance and service work.
This potential risk cannot be completely eliminated considering the func-
tional availability of the operating manual. Therefore, all individual regula-
tions of this Operating manual are to be observed.
60 / 240
1242467 CAPTIS-M