Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original page 83

6. Press the handle key of the changing device (1) to unlock the collet (2).
7. Remove the changing device (1).
ü The collet (2) is inserted.
Removing the collet
§ The collet chuck is in release position.
1. Push the pins of the changing device (1) into the change holes of the
collet (2).
2. Press the handle of the changing device (1).
Ø The handle must perceptibly lock into place.
3. Remove the collet (2) and place it on a flat surface.
4. Press the handle key of the changing device (1) to unlock the collet (2).
5. Remove the changing device (1).
ü The collet (2) is removed.
1242467 CAPTIS-M
Operation of the collet chuck | 6
EN
83 / 240