Obligations Of The Owner; Qualification Of Operating And Specialist Personnel - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

■ Clamping of workpieces with a great imbalance.
■ Assembly of the collet chuck CAPTIS-M and accessory parts with
incorrect torque.
■ Directing the coolant / compressed air jet onto the collet chuck or guide
gap.

2.3 Obligations of the Owner

Before work on and with the collet chuck CAPTIS-M is commenced, the
owner must ensure
■ that the Operating Instructions are available to the responsible
personnel;
■ that the responsible personnel are sufficiently qualified for their work;
□ This applies in particular to assembly, maintenance and repair.
■ that the responsible personnel have read and understood the operating
instructions;
□ RÖHM GmbH recommends that this be documented in a suitable
form.
■ that all safety equipment is correctly mounted and operational;
□ Safety equipment must never be by-passed, manipulated or shut
down.
■ that the collet chuck CAPTIS-M is in perfect working order;
■ that all damaged and defective parts are replaced immediately.

2.4 Qualification of Operating and Specialist Personnel

Personnel without experience of operating clamping fixtures are exposed to
increased risks of injury in the event of incorrect conduct, especially during
assembly and maintenance work, due to the clamping movements and
forces which occur on the clamping fixtures.
Therefore, the collet chuck CAPTIS-M may only be used, set up or repaired
by persons who have received special training or instruction for this purpose
or who have extensive experience.
122017 / 1.0
Safety
57