Dangers Due To Power Failure; Procedure In The Event Of Danger And Accidents - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

2 | Safety
2.5.4

Dangers due to Power Failure

An unexpected power failure during operation may lead to immediate failure
of the clamping force of the collet chuck. The workpiece may then fly out
and cause serious crushing and impact injuries.
To prevent workpieces flying out, ensure perfect functioning of the power
supply before each operation. In addition, the operator and the machine
manufacturer must ensure by means of effective safety equipment that the
actuating and clamping forces are maintained without interruption until the
machine comes to a standstill and the workpiece remains tightly clamped.
2.5.5

Procedure in the Event of Danger and Accidents

In the event of danger and accidents, it must be ensured that first aid meas-
ures can be taken immediately.
1. Shut the machine down immediately via the Emergency-Stop button.
2. Remove the person involved from the danger zone and sit or lay the
person down.
3. Call a doctor.
Ø Do not make any changes to the accident site.
4. Administer first aid.
Ø Stop any bleeding.
Ø Cool burns.
5. Report all accidents to a superior.
62 / 240 1242467 CAPTIS-M