Operation Of The Collet Chuck; Personal Protective Equipment And Personnel Qualification - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

6

Operation of the collet chuck

6.1

Personal Protective Equipment and Personnel Qualification

When working on and with the collet chuck CAPTIS-M, personal protective
equipment must be worn. The owner is responsible for providing personal
protective equipment.
▪ Personal protective equipment must be in perfect condition when carry-
ing out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the
working area.
1242467 CAPTIS-M
WARNING
Crushing injuries and cuts due to start-up of the machine dur-
ing set-up work.
Flying parts may cause serious injuries.
Ø Disconnect the power supply before assembly.
Ø Protect the machine against being re-started.
Ø Wear personal protective equipment.
Risk of burns due to hot surfaces.
Burns on hands.
Ø Do not touch the collet chuck when in operation.
Ø Allow the collet chuck to cool down before carrying out neces-
sary work.
Ø Wear personal protective equipment.
Skin irritations due to contact with lubricants.
Lubricants may cause irritations in the event of contact with the
skin.
Ø When handling the collet chuck, wear safety goggles, long
work clothes and gloves.
Ø Avoid skin contact with lubricants.
Operation of the collet chuck | 6
CAUTION
CAUTION
EN
79 / 240