Optional Accessory - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

4. Tighten the threaded pins (1) with the permissible tightening torque
(see Checking the Tightness of Screw Connections [} 87]) .
ü The insert is fitted.
Replacing the insert
1. Loosen the three threaded pins (1) from the flange at the side.
2. Remove the insert (protective sleeve (3) with workpiece stop (2)) to-
wards the front.
3. Insert the new insert.
4. Secure the insert with the three threaded pins (1).
5. Tighten the threaded pins (1) with the permissible tightening torque
(see Checking the Tightness of Screw Connections [} 87]).
ü The insert has been changed.
5.7

Optional accessory

For mounting the optional accessory, see Fitting the collet chuck
[} 70].
Flanges pursuant to DIN-ISO 702-1; 702-2; 702-3; 702-4
The collet chuckCAPTIS-M can be mounted on various machines with the
relevant flange.
Base plate
1242467 CAPTIS-M
Fitting the collet chuck | 5
77 / 240
EN