Removing The Plug-In Terminal Blocks; Fig. 5: Removing The Plug-In Terminal Blocks - SICK MOC3ZA Notice D'instructions

en
Chapter 4
Fig. 5: Removing the plug-in
terminal blocks

WARNING
58
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Mounting
MOC3ZA
4.4

Removing the plug-in terminal blocks

➢ Electrically isolate the device.
➢ Push a screwdriver into the cut-out on the front between the terminal block and front
panel.
➢ Turn the screwdriver around its longitudinal axis.
On the removal of the plug-in terminal blocks pay attention to the correct allocation of
the connections!
Ensure that removed terminal blocks are only re-connected to the correct slot. For this
purpose apply, e.g., clear labels to the terminal blocks.
Operating instructions
Connection block with
spring terminals
(PC or Plugin Cageclamp)
Connection block with
screw type terminals
(SC or Plugin Screw)
8014608/1DS0/2022-02-16
Subject to change without notice
MOC3ZA