Disposal; Separation Of Materials - SICK MOC3ZA Notice D'instructions

Operating instructions
MOC3ZA
Note

WARNING
Tab. 1: Overview on disposal
by components
8014608/1DS0/2022-02-16
Subject to change without notice
On safety
➢ At work, always act in an environmentally responsible manner.
2.5.1

Disposal

Unusable or irreparable devices should always be disposed as per the applicable national
regulations on waste disposal (e.g. European waste code 16 02 14).
We would be pleased to be of assistance to you on the disposal of these devices. Contact
your local SICK representative.
2.5.2

Separation of materials

Only qualified safety personnel are allowed to separate materials!
Caution is required when dismantling devices. There is a risk of injuries.
Before you send the devices for appropriate recycling, it is necessary to separate the
different materials in the MOC3ZA.
➢ Separate the housing from the rest of the parts (in particular the circuit board).
➢ Send the separated parts for recycling as appropriate (see following table).
Components
Product
Housing
Circuit boards, cable, connector and
electrical connecting pieces
Packaging
Cardboard, paper
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Disposal
Plastic recycling
Electronic recycling
Paper/cardboard recycling
en
Chapter 2
49