Abbreviations Used; Symbols Used - SICK MOC3ZA Notice D'instructions

en
Chapter 1
EDM
EMC
ESPE
Recommendation
Note
, , 
 Take action ...

WARNING
46
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
About this document
1.5

Abbreviations used

External device monitoring
Electromagnetic compatibility
Electro-sensitive protective equipment
1.6

Symbols used

Recommendations are designed to give you some assistance in your decision-making
process with respect to a certain function or a technical measure.
Refer to notes for special features of the device.
LED symbols describe the status of an LED as follows:
The LED is illuminated constantly.

 The LED is flashing.
The LED is off.

Instructions for taking action are shown by an arrow. Read carefully and follow the
instructions for action.
Warning!
A warning indicates an actual or potential risk or health hazard. They are designed to help
you to prevent accidents.
Read carefully and follow the warning notices!
The term "dangerous state"
The dangerous state (standard term) of the machine is always shown in the drawings and
diagrams of this document as a movement of a machine part. In practical operation, there
may be a number of different dangerous states:
 machine movements
 electrical conductors
 visible or invisible radiation
 a combination of several risks and hazards
 and so on
Operating instructions
MOC3ZA
8014608/1DS0/2022-02-16
Subject to change without notice