GRAUPNER heim Starlet 50 Mode D'emploi page 66

Starlet 50
1.9 Glowplug connector
(bag UM-6)
Fit the socket of the glowplug connector in the hole in the right-hand side frame 4448.34, and fit
the solder tag, the washer and the nut on it on the inside to secure the socket. Tighten the nut.
Make up the connection to the motor using twin-core cable. A crocodile clip is used for the
centre contact, so that the glowplug can be replaced quickly and easily; solder the croc-clip to
the wire running from the centre contact of the socket, and attach the clip to the glowplug. Fix
the other wire to one of the motor mount screws with a washer to spread the load. Arrange the
cables neatly, and solder the two wires to the positive and negative terminals of the socket.
18