GRAUPNER heim Starlet 50 Mode D'emploi page 54

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Accessories
Recommended motors and accessories for the Starlet 50
Motor
Capacity
cc
OS MAX 46
7,45
FX-HG
OS MAX 50
8,17
SX-HG
Glowplug battery, e.g.
Varta RSH 4
Varta RSH 7
2 V glowplug battery
2 V glowplug battery
Fuel
TITAN S 12
AeroSynth COMPETITION SX-10 Order No. 2811
Starter
Electric starter, Order No. 1628 or 1626
12 V starter battery, Order No. 2592 or 2593.
Suitable main rotor blades
Order No. 1291.1
Order No. 1296
Order No. 1269
Order No. 1271
Radio control equipment: see main Graupner catalogue
We recommend that you use a radio control system equipped with special helicopter functions,
or a micro-computer radio control system such as the mc-12, mc-14, mc-15, mc-19, mc-22, mc-
24.
As a minimum your RC system must include a 3-point swashplate mixer and the ability to
control five servos for the functions pitch-axis, roll, collective pitch, tail rotor and
throttle.
Servos:
Use only high-performance servos such as the C 4041, Order No. 3916, or other servos of
equal or better quality.
Gyrosystem:
Gyro-System PIEZO 5000, Order No. 5146 with Super-Servo DS-8700G, Order No. 5156 or
Gyro-System PIEZO 550, Order No. 5147 or Gyro-System G490T, Order No. 5137
Electronic speed governor:
mc-HELI-CONTROL, Order No. 3286
Receiver power supply:
For safety reasons we recommend that you install a battery with a capacity of at least 1800
mAh, and a switch harness designed to cope with heavy currents, i.e. with heavy-duty cables.
We recommend the "Power switch harness" with charge socket, Order No. 3050, in conjunction
with the 4RC-3000 MH receiver battery, Order No. 2568
On no account use a receiver battery with more than four cells.
You can monitor the state of your battery voltage constantly by using the NC battery controller,
Order No. 3138.
Order
Expansion silencer
No.
1893
1809.33
1871.72
1921
1809.33
1871.72
Order No. 1353
Order No. 1352
Order No. 3694 ( Use only with resistor,
Order No. 771
Order No. 2612
Wood, reflex,
500 mm long
GRP, reflex,
552 mm long
GRP, symm.,
552 mm long
GRP, symm.,
602 mm long
Exhaust
manifold
2259
2259
Order No.1685 or 1694. )
Rotor Ø 1157 mm (supplied)
Rotor Ø 1261 mm
Rotor Ø 1261 mm
Rotor Ø 1361 mm
6
Starlet 50
(Tuned pipe)
silencer
1783A or
2272
1783A or
2272

Publicité

Table des Matières
loading

Table des Matières