GRAUPNER heim UNI-Mechanik 2000 Mode D'emploi page 64

UNI-Mechanics 2000
1.6.4 Installing the cooling fan housing
(bag U2-3)
You may need to enlarge the carburettor opening in the fan housing, depending on the carbu-
rettor you are using.
If you have installed a side-exhaust two-stroke motor, you will need to cut an opening in the
left-hand side to provide clearance for the exhaust manifold (see illustration); use a fretsaw for
this.
Slide the fan housing over the motor and fix it to the mechanics with two 2.9 x 13 self-tapping
screws at the rear, and two M3 x 16 socket-head cap screws at the front.
18