Cancelling The Preset Time Function; Setting The Duration - Sentiotec Pro D Serie Instructions D'installation Et D'utilisation

Instructions for use for the user

10.16. Cancelling the preset time function

● Press the On/Off button A, to cancel the preset function.
► The preset time countdown is cancelled.
► The control unit starts immediately with the previously set functions.

10.17. Setting the duration

When you start the sauna, you can already determine how long the sauna
is to operate. In this case, the maximum heating time cannot be exceeded
(e.g. 6 h for private saunas). The sauna operation must already be started before
the operating time can be set.
1. Select the temperature symbol 5 by pressing the mode button D.
2. Press the On/Off button A and the minus button C simultaneously for about
3 seconds.
► The display 1 shows the "hours" (flashes slowly).
3. Set the desired duration in hours with the plus button B and the minus button C.
4. Press the mode button D for about 3 seconds.
► The display 1 shows the "minutes" (flashes quickly).
5. Set the desired duration in minutes with the plus button B and the minus
button C.
6. Press the On/Off button A to save the set operating time.
► The sauna control unit switches off all functions after the set operating time.
► Then the sauna control unit is in standby mode.
The operating time can be exited by briefly pressing the mode button D
(without effect).
WORLD OF WELLNESS
p. 58/70