Installing Foil Sensor Fts2 (Optional, Only Pro D2I/Pro D3I) - Sentiotec Pro D Serie Instructions D'installation Et D'utilisation

Installation instructions, for professionals only

4.6. Installing foil sensor FTS2 (optional, only Pro D2i/Pro D3i)

If one of the following infra-red heater panels is connected to an additional output,
the foil sensor 1-014-445/P-ISX-FF must be used:
● 1-028-348/IR-WP-100
● 1-028-343/IR-WP-175
● 1-028-784/IR-WP-390
● 1-028-938/IR-WP-510
● When installing the foil sensor, observe the operating instructions for the
infra-red heater panels.
● Use of a foil sensor must be activated on the technician menu (see "Activat-
ing/deactivating foil sensor (only Pro D2i/Pro D3i)" on page 40).
WORLD OF WELLNESS
● 1-028-149/IR-WPHL-100
● 1-028-941/IR-WPHL-175
● 1-028-601/IR-WPHL-390
● 1-028-885/IR-WPHL-510
p. 25/70
EN