Installing The Control Panel - Sentiotec Pro D Serie Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installation instructions, for professionals only

4.2. Installing the control panel

The control panel 2 is installed on the cabin wall at a maximum distance of
10 metres from the power supply unit 1 (see Fig. 4).
Installation requires the use of a standard jigsaw, for example,
to cut out the recess for the control unit. The control panel can be
either inside or outside the cubicle.
* For installation inside a sauna cubicle, a minimum clearance of 50 cm
from the cubicle roof must be maintained (see Fig. 4).
ATTENTION!
Damage to the unit
● The control unit 2 of the sauna control unit is splash-proof (protection class
IP IPX4).
● Work on the control panel may only be carried out using a standard screwdriver.
Using a cordless screwdriver may cause irreparable damage to the housing.
min. 50 cm
2
WORLD OF WELLNESS
Power supply
1
*
Control
panel
Fig. 4
*
for assembly inside the cabin
unit
Control panel position
External view
p. 20/70

Publicité

Table des Matières
loading

Table des Matières