Cancelling The Preset Time Function; Setting The Duration - Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user
4. Press the intensity selector 3.
► The sauna control unit changes to standby mode and the timer starts running.
► The remaining preset time is shown in the intensity display 4.
► The preset time symbol flashes.
► The intensity selector 3 lights up.
► Once the preset time has elapsed, the selected functions are started.
If you want to set long preset times, use the quick preset function:
● Press the intensity selector 3 and turn it at the same time.
► The preset time changes in steps of one hour.

10.8. Cancelling the preset time function

● Press the intensity selector 3 to cancel the preset time function.
► The preset time countdown is cancelled.
► The preset time symbol lights up and stays lit.

10.9. Setting the duration

When you start the sauna, you can already determine how long the sauna is to
operate. In this case, the maximum heating time cannot be exceeded (e.g. 6 h for
private saunas). The duration is shown in hours and minutes, e.g. 3 hours and
15 minutes is shown as 3.15.
1. Turn the function selector 2 to position F (duration).
► The most recently set duration is shown in the intensity display 4.
2. Use the intensity selector 3 to set the preferred duration.
If you want to set long durations, use the quick preset function:
● Press the intensity selector 3 and turn it at the same time.
► The duration changes in steps of one hour.
WORLD OF WELLNESS
p. 38/48