Instructions for installation and use
p. 10/70
3. Product description
3.1. Specifications supplied
● Operating unit (depending on version Pro D2/D2i/D3/D3i)
● Power unit
● Heater sensor with integrated overheat cut-out
● Sensor wires
● Installation material
● Wire jumper for bridging terminals V1 and Wm for combi heaters without
low-water shut-off
3.2. Optional accessories
● Bench sensor (1-009-231/O-F2), sensor cables 1.5 m
● Humidity temperature sensor (1-010-081/O-FTS2), sensor cables 3 m
● Foil sensor (1-014-445/P-ISX-FF), sensor cables 3 m
● Power booster (1-008-779/O-S2-18, 1-009-280/O-S2-30)
● Safety shut-off (1-027-796/HT-SWL)
● Operating unit Pro D2 (1-040-159/PRO-D2-CU)
● Operating unit Pro D2 white (1-040-161/PRO-D2W-CU)
● Operating unit Pro D2i (1-040-163/PRO-D2I-CU)
● Operating unit Pro D2i white (1-040-165/PRO-D2IW-CU)
● Operating unit Pro D3 (1-040-167/PRO-D3-CU)
● Operating unit Pro D3 white (1-040-169/PRO-D3W-CU)
● Operating unit Pro D3i (1-1040-173/PRO-D3I-CU)
● Operating unit Pro D3i white (1-1-040-173/PRO-D3IW-CU)
● Additional output control panel Pro D (1-040-174/PRO-DA-CU)
● Additional output control panel Pro D white (1-040-175/PRO-DAW-CU)
WORLD OF WELLNESS