Cancelling The Preset Time Function; Setting The Duration; Changing The Preset Values - Sentiotec PRO-C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user

10.8. Cancelling the preset time function

● Press the intensity selector 3 to cancel the preset time function.
► The preset time countdown is cancelled.
► The preset time symbol lights up and stays lit.

10.9. Setting the duration

When you start the sauna, you can already determine how long the sauna is to
operate. In this case, the maximum heating time cannot be exceeded (e.g. 6 h
for private saunas). The duration is shown in hours and minutes, e.g. 3 hours
and 15 minutes is shown as 3.15.
1. Turn the function selector 2 to position F (duration).
► The most recently set duration is shown in the intensity display 4.
2. Use the intensity selector 3 to set the preferred duration.
3. To save the operating time permanently, press the bottom knob for one second.
► The bottom knob lights up 4 times – the setting is saved.
If you want to set long durations, use the quick preset function:
● Press the intensity selector 3 and turn it at the same time.
► The duration changes in steps of one hour.

10.10. Changing the preset values

You can change the preset values at any time during operation.
1. Turn the function selector 2 to the function you want to change.
2. Use the intensity selector 3 to set the preferred preset value.
WORLD OF WELLNESS
p. 38/48