Reaction Of The Code Lock To Incorrect Entries - Sygonix SY-4500816 Notice D'emploi

l) Reaction of the code lock to incorrect
entries
The lock function of the code lock disables PIN code entry/access
after an incorrect PIN code is entered. If the PIN code is entered
incorrectly 10 times, the code lock and secure access is locked
for 10 minutes. This function can be enabled or disabled as de-
sired. The lock function is disabled by default.
40
Start your entry with the * key, followed by
the current master code (in this example,
the factory preset code "123456" is used).
Press the # key to confirm your entry. A long
beep/buzz indicates the switch. The red LED
flashes every 1.5 seconds to indicate that
programming mode is enabled.
To disable the lock function, enter the digit
"6", press the # key and add "0". Press the
# key to confirm your entry.
To enable the lock function, enter the digits
"60", press the # key and add "1". Press the
# key to confirm your entry.
After you have configured the settings, press
the * button to exit programming mode.