Programming The Door Open Warning - Sygonix SY-4500816 Notice D'emploi

Relay buzzer
2
The buzzer is enabled by default.
o) Programming the door open warning
If the lock controlled by the relay has a magnetic contact (optional
or built-in), the buzzer will automatically beep after approximate-
ly 1 minute to remind the user to close the door. To stop the
warning beeps, the door must be closed or the opening button
must be pressed indoors. If this does not happen, the door open
warning will sound until the preset warning duration has elapsed.
This audible warning lasts for one minute, as with all other alarms
on this product.
Enter the memory space 71. Then press
the # button. To turn off the keypad buzz-
er, press 0. Then press the # key to confirm
your entry.
Select the memory space 71. Then press
the # button. To turn on the keypad buzz-
er, press 1. Then press the # key to confirm
your entry.
Start your entry with the * key, followed by
the master code (in this example, the factory
preset code "123456" is used). Press the #
key to confirm your entry. A long beep/buzz
indicates the switch. The red LED flashes
every 1.5 seconds to indicate that program-
ming mode is enabled.
43