Sygonix SY-4500816 Notice D'emploi page 45

Deleting the reset card
1
Reset cards are only used to reset the keypad. They
cannot be used as opening cards to operate the relay.
125 kHz EM cards are required for this purpose.
You can program a maximum of two reset cards. If you
add additional reset cards, the saved IDs of the previ-
ously added reset cards will be overwritten and thus
rendered unusable.
To program the first reset card, enter 00 fol-
lowed by ## on the keypad.
Then hold your reset card 1 over the
symbol on the keypad.
The keypad will detect the reset card 1 and
store it as a reset card.
To program the second reset card, enter
01## on the keypad.
Then hold your reset card 2 over the
symbol on the keypad.
The keypad will detect the reset card 1 and
store it as a reset card.
To delete the first reset card, enter 00## on
the keypad.
The keypad will then delete the reset card 1.
To delete the second reset card, enter 01##
on the keypad.
The keypad will then delete the reset card 2.
45