Sygonix SY-4500816 Notice D'emploi page 25

• The relay and the opening button will beep briefly. If this does
not happen, this indicates that pairing was not successful.
Three short beeps indicate that the pairing process failed.
Repeat the pairing process as described above.
Pairing the keypad with several relays
3
Remove the rear cover on the keypad and all of the relays that
you want to pair.
• Enter the *Master code #80# am on the keypad.
• Press the "Pair" button on the first relay.
• The relay and the keypad will beep briefly. If this does not
happen, this indicates that pairing was not successful. Three
short beeps indicate that the pairing process failed. Repeat
the pairing process as described above for the corresponding
relay.
• Now press the pairing buttons on all the other relays to
complete the pairing process for each relay as described
above.
You must complete pairing of all relays (maximum five)
within 30 seconds, otherwise the keypad will automati-
cally exit pairing mode.
• Press the * key to cancel the pairing process at any time before
the 30 seconds has elapsed.
25