Programming The Relay Behaviour - Sygonix SY-4500816 Notice D'emploi

j) Programming the relay behaviour
The behaviour of the relay when it is opened can be set to func-
tion in different ways. It can be set to timer or toggle mode. In
timer mode, the relay is activated for a preset time when the cor-
rect user code is entered. After this time, the relay switches off
automatically and the code lock switches back to standby mode.
The timer can be set from 0.5 to 99 seconds.
Start your entry with the * key, followed by
the current master code (in this example,
the factory preset code "123456" is used).
Press the # key to confirm your entry. A long
beep/buzz indicates the switch. The red LED
flashes every 1.5 seconds to indicate that
programming mode is enabled.
Press the "3" and "0" keys to set the access
mode to "PIN only".
Press the "1" key to set the access mode to
"PIN and card".
Press the "2" key to set the access mode to
"PIN or card".
In the factory settings, the access mode is
set to "PIN code" or "EM card".
Exit programming mode after you have fin-
ished setting the access mode.
37