Connection; Assignment Of The Connection Contacts - Sygonix SY-4500816 Notice D'emploi

9. Connection

Ensure that the connection cables are not kinked or
squashed. This can cause malfunctions, short circuits
and device defects. Only connect devices when the
product is disconnected from the power supply.
• Always place the cables bare/stripped into the screw
connections and tighten them sufficiently with a screwdriver.
Take care not to over-tighten them.
• Use the supplied screwdriver to connect the electrical
connections.
a) Assignment of the connection contacts
Contacts
on the
relay
GND
+12 V
ALARM
COM
NO
16
Meaning
Negative pole ground connection (2x)
Positive pole 12 V/DC
Negative alarm contact
Connection for relay output
Connection for relay (fail-secure configu-
ration)