Setting The Access Mode - Sygonix SY-4500816 Notice D'emploi

place card
i) Setting the access mode
The system provides three ways to open a door:
- PIN only
- PIN and card
- PIN or card
36
Start with the number 2.
Hold the EM card you want to delete over
the symbol on the keypad, and then
press the # key to confirm the deletion.
You can then delete additional EM cards
from users in the same way.
Press the * button to exit the delete pro-
cess.
Start with the number 2. Then enter "0000"
four times to delete all programmed user
IDs. Press the # key to confirm the dele-
tion of all data.
Press the * button to end the process.
The keypad will beep each time a key is
pressed. The red LED flashes every 1.5
seconds during the programming process.