Restoring Factory Settings; Care And Cleaning - Sygonix SY-4500816 Notice D'emploi

r) Restoring factory settings
Press the # key, and then hold the reset card over the area
marked with the
that factory settings have been restored.
After a reset, all previously programmed user codes are
retained. The master code will be reset to "123456".
The keypad must then be paired with the relay again.
For details, see "Pairing components".

14. Care and cleaning

Never use aggressive detergents, rubbing alcohol or
other chemical solutions, as these could damage the
housing or stop the product from functioning properly.
• Disconnect the product from the power supply before clean-
ing. The keypad does not need to be disconnected from the
power supply.
• Use a dry, lint-free cloth to clean the indoor components. If
necessary, you can clean the keypad with a damp cloth.
46
symbol on the keypad. A short beep confirms