Programming Visitor Pin Codes - Sygonix SY-4500816 Notice D'emploi

Present card
f) Programming visitor PIN codes
You can program up to 100 visitor PIN codes/cards using the
keypad. Assign the ID numbers from 00 – 099. The length of a
visitor PIN code can vary from 4 to 8 digits. Four digits are the
minimum length.
The zero "0" at the beginning distinguishes visitor codes from
regular user codes. The number of times a PIN code or EM card
can be used for can be set from 1 to 9 times. If 9 has been set,
the visitor PIN code or visitor EM card will become invalid after 9
opening attempts.
32
Start with the number 1. Then select the
user ID (in the example, the user ID is "2") to
assign the EM card to a specific user. Press
the # button.
Then hold the EM card you want to program
over the symbol on the keypad. The pre-
viously entered user ID will be assigned to
the card. There is no need of pressing the #
key when using an EM card.
To confirm the user's ID, complete the pro-
cess by pressing the # key.