Programming; Quick Overview For Programming - Sygonix SY-4500816 Notice D'emploi

Low battery
(opening
button)
Low battery
(keypad)

13. Programming

Do not interrupt the power supply to the keypad when
programming! This may result in memory errors.
During programming, press the buttons in the order
shown in the left-hand image. Pay attention to the ex-
planations on the right-hand side.
a) Quick overview for programming
The red and the green LED
are flashing alternately.
Red and green LEDs light up
together
Start programming mode
*(Master code)#
Change the master code
0 (new master code)#(repeat new
master code) (six digits)
--
3 x beeps
for each
button press
27