Publicité
Les langues disponibles
Les langues disponibles
V750 IE
4.6.3.
VALVE GUIDE FROM HEADS DISASSEMBLY
•
Remove valve guide gaskets and take out bottom
spring cap.
NOTE Valve guides must be replaced when wear is such
that valve replacement alone is insufficient to eliminate
clearance between valve stem and internal hole of valve
guide.
•
Valve guides are removed with an appropriate punch
and mallet by hitting from the inside towards the
outside; this operation is made easier by preheating
the head to about 50-60°C (122-140°F).
ENGINE
4 - 49
Publicité
Chapitres
