Con Rod Reassembly - MOTO GUZZI V750 IE Mode D'emploi

ENGINE
4.11.3.

CON ROD REASSEMBLY

•
Before assembling
assembly direction.
•
Reassemble con rods in driving shaft seat on con rod
pin by tightening the screws to the prescribed torque.
CON ROD SHIM CHECK
Make sure that assembly clearance of con rods and driving
shaft shoulders complies with prescribed values:
mm 0,265÷0,515 (in 0.0104 ÷ 0.0203).
4 - 84
check reference marks and
V750 IE