MOTO GUZZI V750 IE Mode D'emploi page 751

Engine
•
Above the crankshaft hole on the alternator side.
•
Next to the crankshaft hole on the clutch side.
Specification
Class 1
Class 2
Class 3
Class 4
Four different crankcase classes are available:
•
(1-2) according to diameter of hole in half crankcase shells on alternator side.
•
(3-4) according to diameter of hole in half crankcase shells on clutch side.
CRANKSHAFT
The crankshaft class is stamped on the crankshaft counterweights
ENG - 56
C
RANKCASE HOLE DIAMETER
Bushing seat diameter: 43.657-43.663 mm (1.7188-1.7190 in)
Bushing seat diameter: 43.664-43.670 mm (1.7191-1.7193 in)
Bushing seat diameter: 47.130-47.136 mm (1.8555-1.8557 in)
Bushing seat diameter: 47.137-47.142 mm (1.8558-1.8560 in)
Engine 750 Euro 4
Desc./Quantity