Cylinder Head - MOTO GUZZI V750 IE Mode D'emploi

Engine 750 Euro 4
•
Remove the secondary air valve
•
check and if necessary replace the ex-
ternal rubber gasket
•
Remove the internal filter paying atten-
tion to the direction during refitting

Cylinder head

Removing the valves
•
Place the special tool on the upper cap
of the valve to be removed and at the
centre of the head of the valve.
Specific tooling
020382Y Tool to extract valve cotters
•
Close the tool to compress the spring,
and then hit the tool head with a mallet
so that the two cotters get detached
from the upper cap
Engine
ENG - 65