Flywheel Thrust Plate Reassembly - MOTO GUZZI V750 IE Mode D'emploi

ENGINE
4.5.3.

FLYWHEEL THRUST PLATE REASSEMBLY

•
When reassembling flywheel thrust plate on driving
shaft make sure that "yellow" mark on driving shaft is
perfectly in line with groove on engine flywheel.
•
Tighten the screws and insert the appropriate flywheel
stopping tool.
•
Crosswise lock screws with dynamometric spanner to
prescribed torque. It is advisable to replace flywheel
securing screws to driving shaft.
•
Insert clutch engage-disengage cup and relative
blocking ring.
4 - 42
V750 IE