MOTO GUZZI V750 IE Mode D'emploi page 777

Engine
•
Insert the piston rings paying attention to their mounting direction and end gap arrangement;
the end gaps must be approximately 120 degrees from each other.
Fitting the piston
•
Place the piston on the connecting rod
notch
CAUTION
MOUNTING POSITION IS INDICATED BY AN ARROW
POINTING IN THE DIRECTION OF TRAVEL
•
Insert the pin
•
Insert the retainer ring
Installing the cylinder
•
Check that the piston ring end gaps are approximately 120 degrees from each other.
ENG - 82
Engine 750 Euro 4