MOTO GUZZI V750 IE Mode D'emploi page 798

Engine 750 Euro 4
Description
Between pump body and external rotor (MAXI-
MUM WEAR VALUE)
Between hole on the internal rotor and the drive
shaft (MAXIMUM WEAR VALUE)
Between hole on the internal body and the drive
shaft (MAXIMUM WEAR VALUE)
FITTING CLEARANCES
Installing
•
Insert the bearing on the pump body
•
Insert the external rotor (3), the internal
rotor (2) and the pin (1) on the pump
body paying attention to match the
punching present on the rotors and that
both are visible
FITTING CLEARANCES
Wear limit
0.135 mm (0.0053 in)
0.04 mm (0.0016 in)
0.061 mm (0.0024 in)
Engine
Values
ENG - 103