MOTO GUZZI V750 IE Mode D'emploi page 768

Engine 750 Euro 4
Installazione piattello blow-by
•
Place the blow-by cap on the camshaft
making the holes and the special tim-
ing plug match
Installazione catena
•
Fit the chain, together with timing sys-
tem gear and oil pump gear
CAUTION
IF AN ALREADY USED TIMING SYSTEM CHAIN IS REFIT-
TED, PLACE IT ON THE SAME SIDE WHERE IT WAS RE-
MOVED
CAUTION
ALIGN THE REFERENCE NOTCHES ON THE CRANK-
SHAFT AND ON THE TIMING SYSTEM GEAR SO AS TO
ENSURE THE CORRECT ENGINE TIMING
•
Turn the pin of the oil pump, until align-
ing the gear process with the pin mill-
ing.
•
Fit the safety plug
Engine
ENG - 73