Valve Seat Rectification - MOTO GUZZI V750 IE Mode D'emploi

ENGINE
4.6.5.

VALVE SEAT RECTIFICATION

NOTE Valve seat rectification after valve guide replacement
or when valve seat is not tight rectification must be carried
out.
•
Once the pilot tool has been chosed put it in the valve
guide and lock in place.
•
Choose mill according to diameter and valve seat
inclination.
•
Insert the mill in pilot tool and carefully push it down to
valve seat level.
•
Put the mill in the T spanner and turn clockwise
applying pressure lightly until uniform valve contact
surface is obtained.
4 - 52
V750 IE