MOTO GUZZI V750 IE Mode D'emploi page 66

Masquer les pouces Voir aussi pour V750 IE:

Les langues disponibles

Check that pin surface in contact with rocker arms is

not overworn.

Check contact surfaces of both valve rocker arm and

rocker arm rod.

ROCKER ARM REASSEMBLY

Check that longitudinal milling is set towards oil

delivery duct.

IMPORTANT Pay special attention to the correct orientation

of the washers at the time of reassembly.

Insert oil delivery union and rocker arms on the axes

locking them in place with the piston rings.

Chapitres