MOTO GUZZI V750 IE Mode D'emploi page 781

Engine
•
Following a cross order "A-C-B-D"
screw the fixing nuts of the cam tower
to the prescribed torque
•
Insert and tighten the compensation
nut of the cam tower to the prescribed
torque
•
Insert the rocker rods
•
Place the rocker in its seat by inserting
the Belleville spring at the same time
•
Using the rocker shim centring pin, align the rocker and the Belleville spring with the pin seat
for easy insertion
Specific tooling
020995Y Rocker centring pin
ENG - 86
Engine 750 Euro 4