Disassembly; Electrical Connection - Burkert 2300 Instructions De Service

→
Rotate the actuator anti-clockwise and move it into the required
position.
* The special key (identification number 00 665 702) is available from your
Bürkert sales office.
8.5.

disassembly

Danger!
risk of injury from discharge of medium and pressure!
It is dangerous to remove a device which is under pressure due to
the sudden release of pressure or discharge of medium.
• Before removing a device, switch off the pressure and vent the
lines.
26
english
Type 2300

Electrical connection

9. elecTrical cOnnecTiOn
The electrical connection of the pilot valve or the activation
units is described in the respective operating instructions
for the pilot valve/activation unit in the chapter titled
"Installation".
Observe the voltage and current type as specified on the
rating plate
(Voltage tolerance ±10%)!