Concluding The Optical Impressions - Dentsply Sirona CEREC AC Connect Notice D'utilisation

7 Operation
7.4 Directing the camera
50
Operating Instructions for the Acquisition Unit - With CEREC Omnicam
● When performing this activity, be careful not to accidentally cut out
any areas that e.g. are located behind the model or are otherwise
cut away from the line.
● This cut must be completed during the ACQUISITION phase using
the cutter.
7.4.8

Concluding the optical impressions

ü The exposures are complete.
1. Click on the "Next" button.
Ä The virtual model is calculated and displayed in color.
Ä Gray sections highlight data material that is missing from the
calculated model.
2. If missing data emerges in the preparation area, carry out further
scans.
Change back to the "ACQUISITION" phase. Perform additional scans to
complete the model structure.
Dentsply Sirona
66 37 479 D3492
D3492.201.07.28.02 09.2019