Test Procedure; Customer Diagnostics - Dentsply Sirona CEREC AC Connect Notice D'utilisation

Dentsply Sirona
Operating Instructions for the Acquisition Unit - With CEREC Omnicam
66 37 479 D3492
D3492.201.07.28.02 09.2019
6. Select the test using the arrow keys.
7. Confirm your selection with the "Return" key on the keyboard.
Ä The test starts.

Test procedure

10.3
10.3.1

Customer Diagnostics

ü You have started the "Customer Diagnostics" test and the
system configuration is displayed.
1. Using the information in the system configuration, check whether
the system corresponds to the default settings. You can scroll up
and down using the arrow keys.
Tip: The test starts automatically after 3 minutes if you do not press
an arrow key.
2. Press the "Esc" key on the keyboard.
10 PC Diagnostic Tool
10.3 Test procedure
79