Insert Battery (Optional); Using A Trackball - Dentsply Sirona CEREC AC Connect Notice D'utilisation

6 Installation and startup
6.4 Initial startup
34
Operating Instructions for the Acquisition Unit - With CEREC Omnicam
6.4.4

Insert battery (optional)

A Bottom door
B Storage battery
1. Open the lower door on the back panel.
NOTE
Open with coin.
Use a coin to open the latch. Turn counterclockwise.
2. Remove the battery cover.
3. Insert the battery into the battery compartment with the mounting
screw and screw it down.
4. Plug in the battery plug.
5. Attach the battery cover.
6. Put the door back in position and lock it.
6.4.5

Using a trackball

1. Turn the collar (A) counterclockwise and remove it.
2. Insert the ball supplied.
3. Lay the collar (A) into position and turn it clockwise until it snaps
into place.
Dentsply Sirona
C Battery cover
D Battery connector
66 37 479 D3492
D3492.201.07.28.02 09.2019