•
To continue to other function settings, press [Tare/↵] to confirm the current
setting and show the next mode.
•
The display will then show "BK Off", "BK AU", or "BK on" these are the
backlight function settings.
6.3 BACKLIGHT SETTING MODE
•
Press the [FUNC/↑] key to change the state of backlight.
•
"BK Off": the backlight is off all the time.
•
"BK AU": auto backlight, backlight will come on if the display moves off of
zero.
•
"BK on": backlight will be on all the time.
•
Press [Tare/↵] to confirm and move to the next setting. When you enter parts
counting function mode, it will show "PCS on" or "PCS off".
6.4 PARTS COUNTING FUNCTION
•
Press [FUNC/↑] to switch on or off the part counting function.
•
"PCS of": part counting function is off.
•
"PCS on": part counting function is enabled.
•
Press the [Tare/↵] key to confirm the setting and move to the next setting.
The percentage weighing function has been entered when "PER on" or "PER
of" is displayed.
6.5 PERCENTAGE WEIGHING FUNCTION
•
Press [FUNC/ ↑ ] key to switch on or off this function.
•
"PER of ": percentage function is off.
•
"PER on": percentage function is enabled.
•
Press the [Tare/↵] key to confirm the setting and move to the next setting.
The check weighing function has been entered when "CHK on" or "CHK of"
is displayed.
© Adam Equipment Company 2020
8