Yamaha WaveRunner FX140 Manuel D'entretien page 614

– +
ELEC
1
INDICATION SYSTEM
2
Diagnostic display
1. Check:
• Diagnostic display
Does not display → Replace the multi-
function meter.
Checking steps:
• Remove the coupler of the sensor indi-
cated in the multifunction meter.
• Check if "Irregular" is indicated in the
Diagnosis Record of the Yamaha Diag-
nostic System.
• Start the engine and check that the
engine check warning indicator comes on
and the buzzer sounds.
• Press the hour meter/voltmeter display
select switch 1 and the speedometer
display switch 2 for 8 seconds and
check if an error code is indicated on the
multifunction meter.
7-51
E