Mounting A Disc; Setting The Preparation Parameters - Struers TegraPol 21 Manuel D'instructions

Mounting a Disc

Setting the Preparation
Parameters
18
TegraPol-21/ -25/ -31/ -35
TegraForce-3/ -5
Instruction Manual
Ensure that the back of the disc is clean and has nothing attached to it that
may prevent it lying flat on the turntable.
Place the disc on the turntable and rotate it until the 3 driving

pins engage with the holes in the turntable.
Before starting the preparation process, the disc speed and water
application need to be specified. This is done using the control panel
software:
If the MAIN MENU is not currently displayed,

press Esc until the MAIN MENU appears.
Use the Arrow buttons

 Preparation:




Press ENTER



Within this menu, there are 3 preparation options.
Options
Grinding
Polishing
User def for:
TegraPol-21 & -31
TegraPol-25 & -35
Important!
to select Manual


to activate the PREPARATION Menu.
Speed(s) Water
[rpm]
300 ON
150 OFF
50-300 ON or OFF
40 – 600 ON or OFF
Change
Increment
[rpm]
10