Routine Operations; Mounting A Disc; Starting The Disc; Stopping The Disc - Struers RotoPol-31 Mode D'emploi

Routine Operations

Mounting a Disc

Starting the Disc

Stopping the Disc

Selecting Water and Speed

Setting to User Select
Setting to GRINDING
Setting to POLISHING
RotoPol-31/-35
Instruction Manual
Place the disc on the turntable and turn it until the three
driving pins engage with the holes in the turntable.
s
Press START
are executed and connected RotoSystem modules start
operating.
o
Press STOP . The disc stops rotating. Selected functions
and connected RotoSystem modules stop.
You can either select water and speed yourself or press DISC
to select one of the pre-set GRINDING and POLISHING modes.
WATER OFF 150RPM
D U
AN AO
D U
WATER ON 300RPM
GRINDING
D U
AN AO
D U
WATER OFF 150RPM
POLISHING
. The disc starts rotating. Selected functions
The User Select screen has an empty line
at the bottom.
w W
- Press or
WATER OFF.
- Press SPEED
select the speed. (RotoPol-31)
- Press SPEED
speed. (RotoPol-35)
AN
Press DISC
between the settings.
The standard setting GRINDING is pre-
set to WATER ON and 300RPM.
AN
Press DISC
between the settings.
The standard setting POLISHING is pre-
set to WATER OFF and 150RPM.
to select WATER ON or
d d
150 or 300 to
dN dO
or to adjust the
AO
or to change
AO
or to change
AN
11