Preparation Process Setup - Struers TegraPol 21 Manuel D'instructions

TegraPol-21/ -25/ -31/ -35
TegraForce-3/ -5
Instruction Manual
TegraPol-21/ -25/ -31/ -35 are designed for the preparation of most

Preparation Process Setup

materials. In Struers Metalog Guide™ you will find a detailed
description of grinding/polishing for automated mechanical specimen
preparation.
Struers Metalog Guide™ offers preparation methods for the most
common materials, based on a simple analysis of two key properties:
hardness and ductility. Finding the right method is easy, including
choice of consumables.
Always consult Struers Metalog Guide™ on the Struers website for
the correct preparation method for the actual specimens.
Metalog Guide
™
A complete guide to materialographic specimen preparation.
struers.com/KNOWLEDGE/Metalog Guide
17