Operating Tegrapol With Tegraforce; Inserting Specimen Holders; Inserting A Specimen Holder - Struers TegraPol 21 Manuel D'instructions

Inserting Specimen Holders

Inserting a Specimen Holder

36
TegraPol-21/ -25/ -31/ -35
TegraForce-3/ -5
Instruction Manual

6. Operating TegraPol with TegraForce-5

The TegraForce-5 can be operated with either specimen mover
plates for single samples or specimen holders.
Press the Raise/Lower  button to ensure that TegraForce-5 is

fully raised.
Push the black button on the TegraForce-5.

Insert the specimen holder and rotate it until the three pins are

aligned and then push the holder upwards until it locks in
position.
Release the black button on the TegraForce-5 and ensure that

the specimen holder is securely fixed.
When working with specimen holders make sure that the screws clamping
the specimens do not stick out of the specimen holder.
Use different length of screws for samples with different diameters.
WARNING!
Black button
Pins