Routine Operations; Mounting A Disc; Starting The Disc; Stopping The Disc - Struers RotoPol-11 Manuel D'instructions

Routine Operations

Mounting a Disc

Starting the Disc

Stopping the Disc

Selecting Water and Speed

Setting to User Select
Setting to GRINDING
Setting to POLISHING
10
RotoPol-11/-15
Instruction Manual
Place the disc on the turntable and turn it until the three driving
pins engage with the holes in the turntable.
s
Press START . The disc starts rotating. The selected functions
are executed, and connected RotoSystem modules start operating.
o
Press STOP . The disc stops rotating. The selected functions
and connected RotoSystem modules stop.
You can either select water and speed yourself or press DISC
ANO
to select one of the pre-set GRINDING and POLISHING
modes.
WATER OFF 150RPM
D U
AN AO
D U
WATER ON 300RPM
GRINDING
D U
AN AO
D U
WATER OFF 150RPM
POLISHING
The User Select screen has an empty line
at the bottom.
w W
- Press or to select WATER ON or
WATER OFF.
d
- Press SPEED
select the speed. (RotoPol-11)
dN
- Press SPEED
speed. (RotoPol-15)
AN
Press DISC or
between the settings.
The standard setting GRINDING is pre-
set to WATER ON and 300RPM.
AN
Press DISC or
between the settings.
The standard setting POLISHING is pre-
set to WATER OFF and 150RPM.
d
150 or 300 to
dO
or to adjust the
AO
to change
AO
to change